Welcome to the official website of ARK Fluid Technology Co.,Ltd!

Add to Favorite| Leave a Message| Contact Us | Website Map|Chinese

ARK Fluid:0086-510-88552288WUXI ARK FLUID SCIENCE TECHNOLOGY CO.,LTD.

E-mail:199601@wxark.cn   199612@wxark.cnMobile:0086-13616187265 Joan0086-15852783915 Sun

Tel:0086-510-88552288

Hot keywords:crossflow cooling towercounter flow cooling towerwater chiller unitsopen circuit cooling towercrossflow cooling tower designclosed circuit cooling towerRound cooling towersquare cooling tower

ARK Cooling tower

Round Open Type Cooling Tower-FKY

Product category: Open Cooling Tower
ShortDesc:I. Overview
1.Apply transverse current cooling method; the bleaching rate is extremely low.
2.Inner space is large, very convenient for maintenance
3.Fully enclosed circulation, completely eradicating any blocking caused by cats and dogs;
Hotline: 0086-510-88552288

Compound Flow Single Air-Inlet Cooling Tower – FBF

I. Overview
 

1. The whole structure is solid and light; the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics), never being corrosive. The surface finish is added with ultraviolet inhibitor, which can resist sunshine attack and damage.

2. All steel and iron material is processed through galvanizing by dipping, corrosion resisting and durable.

3. Special designed axial-flow type air blower applies belt reduction gear, reducing low noise and sufficient wind; tailor-made water-drop noise reduction carpet to eliminate water sound.

4. Apply special design PVC water block curtain (water-stop) to prevent splashing) remarkably; pressure drop loss is slight and splashing loss is under 0.001%.

5. Special designed water sprinkler with big bore diameter, which won't cause blocking but the sprinkling effect is very good. It is installed in the tower, so it won't bee polluted by outside dust and foreign matters.

6. Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.

7. Water pond applies slant design, easy to wash, containing less water; the operating weight is lower, but the water tank is very big, so it won't absorb air.

8. The cooling tower support is light and solid, convenient to assembly no matter there is suspension iron rack or not.


II. Production selection

 

Round Open Type Cooling Tower-FKY

Type/water yield m3/h/prameters

Standard type

Overall dimension

Fan

Pipe diameter of opened cooling tower

Weight

Noise level

37-32℃

Length (L)

Width (W)

Height (H)

Diameter

Power

Inflow and outflow

Overfall gap

Sewage outlet

Water supplement gap

Dead weight

Operating weight

Standard point

28℃

mm

mm

mm

mm

kw

DNmm

DNmm

DNmm

DNmm

kg

kg

dB(A)

FBH-30

30

3160

1420

3200

1200

2.2

65

50

40

20

1000

2150

59

FBH-40

40

3160

1800

3200

1200

3

80

50

40

20

1040

2200

59

FBH-50

50

3460

1800

3650

1500

4

80

65

40

20

1360

2720

60

FBH-65

65

3460

2100

3650

1500

5.5

100

65

40

20

1850

3580

60

FBH-80

80

3760

2100

4270

1800

5.5

100

80

40

20

2420

4130

60

FBH-100

100

3760

2600

4270

1800

7.5

125

80

40

20

2610

5210

60

FBH-125

125

4160

2600

4320

2200

7.5

125

80

40

20

3230

6580

61

FBH-150

150

4160

3000

4320

2200

11

150

80

40

20

3620

7150

61

FBH-175

175

3760

4160

4270

1800

5.5×2

100×2

80×2

40×2

20×2

4840

8260

62

FBH-200

200

3760

5160

4270

1800

7.5×2

125×2

80×2

40×2

20×2

5220

10420

62

FBH-250

225

4160

5160

4320

2200

7.5×2

125×2

80×2

40×2

20×2

6460

13160

63

FBH-300

250

4160

5960

4320

2200

11×2

150×2

80×2

40×2

25×2

7240

14300

63

FBH-350

300

4160

7720

4320

2200

7.5×3

125×3

80×3

40×3

20×3

9690

19740

64

FBH-400

350

3760

10600

4270

1800

7.5×4

125×4

80×4

40×4

20×4

10440

20840

64

FBH-450

400

4160

8920

4320

2200

11×3

150×3

80×3

40×3

25×2

10860

21450

65

FBH-500

450

4160

10280

4320

2200

7.5×4

125×4

80×4

40×4

20×2

12920

26320

65

FBH-600

500

4160

11880

4320

2200

11×4

150×4

80×4

40×4

25×4

14480

28600

66


III. Product structure

● Attractive appearance It has small overall dimension and light weight and it can fully use the space and save the areas. The appearance is attractive and tidy.

● Light weight and high strength  The tower body has adopted the glass fiber reinforced polyester resin materials (FRP) composite materials and new materials with light weight and high strength and it can undertake the magnitude 8. 0 earthquake and the typhoon level 12 and the snow load is greater than 200kg/m2.

● Minimum noise It has adopted the low noise axial flow blower of advanced technology in domestic as well as the special silencing technique and its noise index is at the advanced level in the industry.

● High quality packing It has special combustion-supporting packing and has adopted the rigid vinyl chloride (PVC) plates. It is applied with special embossing processing and there is the integrated fluid baffle at the internal edge (the side of fan). The heat exchange performance of water and air is furthest improved and the drifting of water is reduced to the minimum. It is sturdy and durable and the heat-resistance temperature is 50 ℃. It has the excellent environmental protection performance.

● Reliable and durable All of the main parts are processed with hot-dip galvanizing to obtain good corrosion resistance performance and its service life is longer than the similar products.

● Unique design
1) The water inlet system, water spray system, water collecting system and heat dissipation packing are calculated through scientific approach and it is rigorous designed to keep smooth water flow and avoid the scaling and blocking.

2) The vacuum forming heat dissipation materials that successfully pass the special design test are used and they have excellent heat exchange effects, the heat dissipation materials have the special diversion design that can prevent the splash of water and make them flow downward along with the heat dissipation materials.

3) The flowing-wind plate is used to make rectification to inlet air and make it smooth so as to obtain good water retaining performance.
 

 

Equipment structure diagram:

FKY cooling tower struct


IV. Technical specification

(1) Cooling system

Heat sink (Famous enterprise in Taiwan- Formosa Plastic)

It adopts the rigid PVC cloth is used and it is made by hot press forming or vacuum forming and it is resistant to corrosion and biological erosion; the unique three-dimensional space three-folding pore type design has high water collecting efficiency and low air resistance and the floating water loss is controlled to be under 0.0005% of volume of circulating water so as to save the water resource to the maximum and prevent the spreading of corps of legionella bacteria.

Counter Flow Tower packingCounter Flow Tower Spray head

(2) Water spray system

The square tower has the unique overflow device and distribution method of spray head to realize the stable and even water distribution of cooling water in different load (the flow of cooling water will change) so as to achieve the energy saving requirements.

(3) Pneumatic system

Motor Special motor of fully closed air cooling tower with protection class of IP55 and insulation class of F and it is suitable for the power supply of 380V/3Φ/50Hz.

Fan blade It is made of aluminum alloy materials and it has the characteristics of light weight, high strength, large air volume, low speed operating, low energy consumption, low noise and long service life. The angles can be randomly adjusted according to the operation load and it has utilized the rated power to achieve the best operation status to the maximum contents.

Electric MotorElectric Fan

(4) Mechanical structure

Shell (Famous enterprise in USA-- Ashland)

 

The import weather-proof gel coat and color type that are resistant to corrosion and include anti-ultraviolet stabilizer is used and they have the characteristics of uniform color, difficult to fade, anti-aging and the surface is as smooth as the mirrors. The round tower has adopted the bottle design and the square tower has adopted the fillet stripe type surface design and it is non-glare and can avoid the light pollution.

Shell (Famous enterprise in USA-- Ashland)

V. Equipment service commitment
To make the customer feel satisfied, it is not just proving good products, but also the measures of installation, quality tracking and maintenance in the service of Ark. The files of customers are stored in the customer service center of Ark and Ark has the consideration of all details for the customers to solve the troubles behind for customers.
 

1. To provide operation training and equipment debugging to customer for free, and the technical guide before the starting up and shut down and the whole technical service and supports will be provided during the application of equipment.

2. If there is deviation between quantity and quality of products or technical specification and the contract, or it is confirmed that the product is defective, the supplier will conduct the maintenance for free or replace the defective products or parts after receiving the notice.

3. After the equipment is put into operation, if there are the damages of parts and quality problems occurring within the warranty period, the supplier shall properly handle it for free to the satisfaction of customer; if it occurs after the warranty period expired, the cost price of parts shall be paid.

4. If there are the operations or other conditions that will affect the normal operation of cooling tower occurring, our company will give the response and provide the solution within 1 hour after receiving the report.

5. The latest technology in environmental protection and energy saving shall be provided to customer as selections for free and the software used by equipment shall be upgraded for free within the life cycle of equipment.

6. The supplier will be responsible for providing the free technical training to the personnel of user, including the principles of equipment, failure diagnose and maintenance, etc.

7. The routine inspection and maintenance work shall be regularly provided.

8. Lifetime service system of product and the parts will be provided with cost price after the warranty period is expired.

9. Our company will be responsible for the guiding of installation (mechanical connection, electrical connection, adjustment whole equipment and test of each functions of equipment), commissioning and trial operation of equipments as well as the site supports and site technical training, etc.

 

 

The import weather-proof gel coat and color type that are resistant to corrosion and include anti-ultraviolet stabilizer is used and they have the characteristics of uniform color, difficult to fade, anti-aging and the surface is as smooth as the mirrors. The round tower has adopted the bottle design and the square tower has adopted the fillet stripe type surface design and it is non-glare and can avoid the light pollution.
 

* Indicated required fieldInquire: Round Open Type Cooling Tower-FKY
* Your Name: Please fill in your First Name
* Last Name: Please fill in your Last Name
Company name: Please fill in your company name
Telephone number:
Mobile phone number: Please fill in your telephone number
* E-mail:
Country:
Address:
* Inquire intention description:
Verification code: Not see?!
Please fill in the quantity and description of Inquire products for uniform stocking.

Hot products

Contact ARK
Wuxi Ark Fluid Science Technology Co., Ltd.

Hotline: 0086-510-88552288

Fax: 0086-510-81152626

E-mail: 199601@wxark.cn

ADD: No.58 Xinfeng Road, Xintai Industrial Zone, Meicun, New Area, Wuxi City,Jiangsu Province